| Home | Links | Contact | Hours |
| Research / Articles - Performance | |
|
|
|
| Leg Length | |
Upper cervical adjustment - A different approach to leg-length discrepanciesBy LENNARD ZINN Very few people generate the same pedaling power with both legs. For some, the difference is dramatic, particularly if there is a measurable difference in the length of a rider's legs. We have noted, for example, that 1984 Olympic road race gold medallist Alexi Grewal suffers from a significant leg-length discrepancy due to an injury during his teens. Prior articles we have run on correcting leg length discrepancies using cleat shims, position adjustments and/or special cranks and pedals (VeloNews, May 8,1995 and VeloNews, March 1993) triggered a steady strewn of correspondence. No one disputes that there are thousands of people walking around with leg-length differences of more than half-an-inch. The controversy usually focuses on how the discrepancy was caused and how best to deal with it. One school of thought believes that it is natural and predictable for a significant proportion of the population to have leg bones of different lengths. Thus, shoes and other sports equipment should be corrected to accommodate it. Others argue that a structure as precise as the human body, whose operation depends upon exact and repeatable reactions occurring on the scale of milliseconds, would not produce bone length discrepancies as large as half-an-inch or more, except in cases like Grewal's, where an injury was involved. They argue that corrections should be performed on the body and not the equipment. |
|
Some
leg-length discrepancies can be improved or corrected by chiropractic means.
Riders using the chiropractic approach report mixed results, but one
chiropractic specialty, "Upper Cervical Technique," practiced by a few
chiropractors, appears to have a high and lasting success rate. The
technique involves very precise measurement and correction of offset in the
top vertebra of the spine.
Background
|
|
| Misaligned
(or "subluxated') vertebrae can impinge on the nerves and hamper body
function. Chiropractors apply force to parts of the spine with the intent of
returning vertebrae to their normal positions. Cracking sounds usually
accompany the adjustment Upper Cervical Technique is distinct in that the
adjustment is only performed on the Cl vertebra. 'Me adjustment normally
makes no sound. Furthermore, the direction of the application of force to
perform the adjustment is not based simply on palpation (the chiropractors
"feel") but rather on detailed analysis of X-rays. From the X-rays, a
three-dimensional force vector is calculated and then applied to Cl to
correct its position. A misaligned atlas throws off leg length and distorts the entire body. The skull and the other vertebrae rotate and tip to compensate for rotation and tip in C1. The head weighs between 8 and 14 pounds. If it is not sitting straight on top of the spine, the muscles of the body must do something to counteract this bowling ball hanging off to the side. If the muscles on one side of the spine are tighter than those on the other, then the pelvis is pulled up on that side, thus "shortening" that leg. I
went to Farmington, New Mexico, a town of 40,000 near the four comers area,
to view this procedure, as there are no practitioners of it within hundreds
of miles of my Boulder, Colorado, home. Lloyd Pond, D.C., who practices with
his son, Lonnie, is recognized among those who follow the subject as one of
the leading practitioners of upper cervical technique. Patients first lie flat on a table to have leg length differences measured. Patients said that they only feel a very slight pressure and the warmth of the hand on their neck. There was no deflection of the patient's head or neck during the procedure, nor was there an audible sound. A heat-sensing probe is passed up the spine on the back of the neck. The probe has a temperature sensor on either side, of the spine hooked up to a machine that graphs the temperature readings as a function of position. The graph shows large surface-temperature variations on either side of the spine, indicating interrupted nerve supply. The adjustment direction is based on X-rays, which one of the Ponds takes to ensure accuracy. Patient position and distance to the lens is precisely set in each of three different X-ray angles. On a light board, lines are drawn on the X-rays through a series of bone points. The precise relative angles of Cl, the head, and the spine are measured in three planes. Once the exact misalignment of the atlas is determined, a vector direction in three dimensions is determined, precisely opposing the misalignment. Adjustment
procedure
|
|
nucca@precisionspinalcentre.com 502 Bow Valley Trail #204 Canmore Ab Phone: 1-403-609-8385
All images and material on this website are Copyright Precision Spinal & Wellness Centre and may not be used without written
permission.
Site by:
Kananaskis.com